Disclaimers
- The UltraEfficient product uses at least 50% less energy and offers a 50,000 hrs. lifetime.
- Philips UltraEfficient LED products use at least 50% less energy as compared to the Philips LED range with comparable lumen output. The Philips UltraEfficient LED range has a lifetime of 50,000 hrs., which is 3x longer than the Philips LED range, with a lifetime of 15,000 hrs. LED lifetime means the length of time until half of the LED light sources maintain at least 70% of their initial lumen output (B50, L70), where the lamp is used on average 3 hours/day.
- Designed for the comfort of your eyes. Visit www.Philips.com/EyeComfort for flicker, strobe, and other criteria and product details.
- Our products are designed to withstand a variety of environmental conditions and have undergone extensive durability testing, including but not limited to temperature extremes, humidity, and impact resistance. The expected lifespan of our UE LED lights under normal usage conditions is rated for up to 50,000 hours. For more detailed information on the specific durability tested per product, please refer to our product specifications.
- LED chip design is optimised for wall-plug efficiency (WPE), which is the measurement of how well an LED light converts electricity into light. The higher the WPE, the more energy-efficient the light and with a higher-quality thermal management system.
- Philips UltraEfficient 40W A60 E27 bulbs use at least 50% less energy than Philips LED A60 E27 bulbs for the same output of 300 lm. Their useful lifetime of 50,000 hrs (B50, L70) is more than 3x longer than the regular LED A60 bulbs. LED Lifetime means the length of time until half of the LED light sources maintain at least 70% of their initial lumen output (B50, L70), where the lamp is used on average 3 hours/day.
- Philips UltraEfficient Diamond Cut 90 40K light uses at least 50% less energy than Philips LED Diamond Cut G2 DL264 RD090 4.5W 40K WH light for the same output of 300 lm. Their useful lifetime of 50,000 hrs (B50, L70) is more than 3x longer than the regular LED Diamond Cut light. LED Lifetime means the length of time until half of the LED light sources maintain at least 70% of their initial lumen output (B50, L70), where the light is used on average 3 hours/day.
- Our UltraEfficient solar products have 5x longer run time when fully charged as compared to comparable Philips LED outdoor solar light. All products are tested and proven weather resistance of IP44 or IP65 compliance and reliability tested to withstand -20~40 celsius environment temperature.
- PstLM ≤ 1.0 measured according to IEC 61547-1 and IEC 61000-4-15.
- All products are tested and proven weather resistance of IP44 or IP65 compliance and reliability tested to withstand temperatures as low as -20ºC and as high as 40ºC, and humidity of up to 85%.
- Sun-resistance: Based on 1000 hours of UV exposure in laboratory settings. Performance may vary based on environmental factors.
- Corrosion-resistant: Based on the Salt Spray Test and appearance of white rust after the required test period, results available upon request. Salt Spray Test - The neutral salt spray (NSS) test is used on all (painting/zinc coating/nickel/ chromium/ brass/copper, and tin-plated products)passivation post-treatment to measure coating protection.
- Based on internal product testing under controlled conditions. Performance may vary based on specific environmental factors.
- PowerShield: Powered by Interpon powder coating, an AkzoNobel brand. Performance based on 1,000 hours of GU testing for temperature and humidity (IEC 60068-2) and UV radiation (ASTM G154 Cycle 6).
- Tested in accordance with IP44 standards for ingress protection. Certification details available upon request. Performance parameters based on laboratory testing under controlled conditions. Actual results may vary depending on environmental factors
